DT1 Fuel Tank
The DT1 fuel tank has the advantage of having both stationary and mobile functions as it has both Transport Canada UN and ULC-S601 certifications. It can be used as either a mobile transfer tank or stationary storage tank to feed fuel-burning equipment like generators, heaters, compressors, and more.
Model shown:
AGB-DT1-1000
The following standard models are available:
- 500L
- 1000L
- 2000L
- 3000L
- 4000L
- 5000L
The DT1 is a bunded tank for diesel or gasoline with a 12 Ga inner tank and outer shell.
Exterior finish: SANDBLAST: SSPC-SP6 – PRIMER: (x4 mils DFT) Dura Prime TOP COAT: (x3 mils DFT) Super Shield Safety Red (Default color) or any other color of the client’s choosing.
Benefits of owning a DT1 fuel cube by Guardian tanks:
- Stackable 3 high
- Avgas and Jet fuel options are available
- Can be lifted with a forklift or a crane
- Can be transported when full
- Certified UN 31A and ULC S601-07
- Meets all TSSA requirements
- Universal pump installation kit
- Color matching system
- Specially built for the harsh Canadian environment
- Easily adaptable to feed most fuel-burning equipment
Inside the DT1
Every DT1 model has the same basic set-up with a storage area big enough for a pump and meter to be installed.
- 2” NPT F. Gits pressure vacuum vent
- 2” NPT F. Spare
- 1 1/2” NPT F. Level gauge Rochester
- 3” NPT M. Fusible fill cap (Emergency vent)
- 1/2” NPT F. Suction & Return (Kit sold separately)
- 2” NPT F. Spare
- 1” NPT F. Suction pump
- Universal pump installation plate
DT1 Trailer
The smaller 500L model will fit inside a regular-size pickup truck but for the bigger 1000L and 2000L models, we offer the DT1 trailer as an option to transport them.
The example below is showing the trailer used to carry a 2000L DT1 fuel tank.
You can use the trailer to carry 1 x 1000L, 2 x 1000L, and as the example shows, 1 x 2000L. For the larger 3000L, 4000L, and 5000L models, you’ll need a larger trailer to transport them which we do not currently offer.
Standard Mobile Fuel Tanks
Standard mobile fuel, gas or aviation fuel tanks
Model shown: AGB-TANK1000SW
The following standard sizes are available in single or double wall options.
- 200L
- 300L
- 450L
- 600L
- 800L
- 1000L
- 2000L
- 3000L
- 4500L
- 5000L
General characteristics:
The following characteristics are true about all mobile tank models made by Guardian Tanks.
- Custom fabrication available (dual compartments, custom dimensions, additional equipment, and more)
- Color matching system
- Fast response time
- Certified with Transport Canada, CGSB 43.146-2022, US DOT, and international standard UN31A
- Same-day shipping on some models
- INTERIOR FINISHING: Clean surface free of dirt, dust, rust, and other contaminants.
- EXTERIOR FINISHING: SANDBLAST: SSPC-SP6 – PRIMER: (x4 mils DFT) Dura Prime TOP COAT: (x3 mils DFT) Super Shield Safety Red (Default color) or any other color of the client’s choosing.
L-Shaped Tanks (with or without toolbox)
Model shown: AGB-TANK0450LC (with toolbox)
Model shown: AGB-TANK0450LS (Without toolbox)
Both models of the L-Shaped tanks are available in the following sizes.
Top-Lift double wall tanks
Model shown: AGB-TANK1000DW-TL
The heavy-duty top-lift double wall tanks are available in the following sizes:
- 200L
- 300L
- 450L
- 600L
- 800L
- 1000L
Characteristics:
- Lift pockets on both ends
- Top-lift handle to be airlifted
- Heavy-duty double wall protection
Single wall tank with top-lift mount option
As an option, it is possible to purchase the top-lift mount that can be attached to any Guardian Tanks single wall models of the following sizes.
- 200L
- 300L
- 450L
- 800L
- 1000L
It can be purchased alone to install on an existing tank or pre-installed on a new tank. This option allows the tank to be airlifted while adding forklift pockets on both sides of the tank.
Model shown: AGB-TANK1000SW with Top-Lift mount attached and stand-alone option
