Dynapac CA15AD Rhino

prix sur demande

DÉTAILS
Standard  
■ Back up alarm ■ Battery switch (std) ■ Brake release ■ Cab with AC ■ Cup and can holder ■ Differential lock (limited slip) ■ Drive control (right side) ■ Drum drive, ECO mode ■ Emergency stop ■ Engine 55 kW(StageIIIA/Tier3) ■ Engine hood lockable ■ Fuel level display ■ High mounted exhaust pipe ■ Horn ■ Hour meter display ■ Hydraulic checkpoints ■ Hydraulic fluid filter “spin-on” ■ Hydraulic fluid (mineral) ■ Interlock, Key (starter) ■ Lifting points ■ Lifting points for jack ■ Manuals (Operation & Maintenance) ■ Manuals (Spare parts catalogue) ■ Operator’s platform (rubber mouted) ■ Operator’s station(fixed) ■ Parking brake ■ Seat (adjustable) ■ Seat belt 2″ ■ Storage for laminated manuals ■ Tie down points ■ Vandal cover (instrument panel) ■ Warning lights (brake, engine oil pressure, engine oil temperature, Engine diagnostics, low charge, low fuel level)
  Optional  
■ Dyn@link Basic ■ ROPS Platform ■ Rotating Beacon ■ Storage box (on ROPS platform)

TECHNICAL DATA+

Masses
Operating mass (incl. ROPS) 6200 kg
Operating mass (incl. Cab) 6400 kg
Module mass (front/rear) 3400/3000 kg
Max. operating mass 6600 kg
Traction
Speed range 0-10 km/h
Max. theoretical gradeability 56 %
Vertical oscillation ±9°
Tyre size
Engine / Drive
Manufacturer/Model Kubota V3307-DI Stage IIIA/Tier 3
Type Water cooled turbo Diesel
Rated power, SAE J1995 55 kW (75 hp)@ 2.200 rpm
Fuel tank capacity 117 l
Hydraulic system
Driving Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum
Vibration Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations
Steering Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel
Service brake Hydrostatic in forward and reverse lever
Parking/ Emergency brake Failsafe multidisc brake in rear axle and front drum motor
A. Wheelbase 2200 mm
B1. Width, front 1870 mm
B2. Width, rear 1530 mm
D. Drum diameter 1220 mm
H1. Height, with ROPS/cab 2700 mm
H2. Height, max. 2780 mm
K1. Ground clearance 360 mm
K2. Curb clearance 360 mm
L. Length 4510 mm
O1. Overhang, right 95 mm
O2. Overhang, left 95 mm
R1. Turning radius, outside 4580 mm
R2. Turning radius, inside 2900 mm
S. Drum shell thickness 22 mm
W. Drum width 1680 mm
α. Steering angle ±33°
The CA15AD is a typical “urban roller” for compacting asphalt compounds in streets, parking lots and industrial facilities, with a high level of finishing and productivity. This version with smooth tires on the rear axle is also intended for paving work in urban areas with steep slopes, where traction capacity is necessary to guarantee a level and attractive surface structure.
Operating Mass: 6200 kg
Static linear load: 20 kg/cm
Compaction width: 1680 mm