Dynapac CC3200 VI

prix sur demande



Max. operating mass 9450 kg
Operating mass (incl. ROPS) 8450 kg
Operating mass (incl. Cab) 8700 kg
Operating mass (incl. Cab and offset) 8900 kg
Module mass (front/rear) 4300 kg/ 4150 kg
Speed range 0-12 km/h
Vertical oscillation ±6°
Max. theoretical gradeability 42 %
Engine / Drive
Manufacturer/Model Deutz TCD 3.6 HT T4f
Type Water cooled turbo Diesel
Rated power, SAE J1995 55 kW (74 hp ) @ 2200 rpm
Fuel tank capacity 130 l
Alternative Engine
Manufacturer/Model Cummins QSB 3.3 IIIA/T3
Type Water cooled turbo diesel
Rated power, SAE J1995 74kW (99hp) @ 2200 rpm
Alternative Engine
Manufacturer/Model Deutz TCD 3.6 HT StageV
Type Water cooled turbo diesel
Rated power, SAE J1995 55 kW (74 hp ) @ 2200 rpm
Hydraulic system
Driving Axial piston pump with variable displacem. Rad. piston motors(2) with variable displacem.
Vibration Axial piston pumps(2) with variable displacem. Axial piston motors(2) with const. displacem.
Steering Gear pump with constant displacem.
Service brake Hydrostatic in forward and reverse lever.
Parking/ Emergency brake Failsafe multidisc brake in both drums.
Compaction CE
Centrifugal force (high/low amplitude) 74 kN / 45 kN
Vibration frequency (high/low amplitude) 45 Hz / 53 Hz
A. Wheelbase 3340 mm
B. Width 1860 mm
B2. Width, with cab 2020 mm
C. Curb clearance 580 mm
D. Drum diameter 1150 mm
H1. Height, with ROPS/cab 2990 mm
K. Ground clearance 270 mm
L. Length 4460 mm
O. Off-set 345 mm
R1. Turning radius, outside 6690 mm
R2. Turning radius, inside 4960 mm
R3. Turning radius with off-set, outside 5000 mm
R4. Turning radius with off-set, inside 3270 mm
S. Drum shell thickness 20 mm
W. Drum width 1680 mm
α. Steering angle ±32°
Operating Mass: 8450 kg
SLL (front/rear): 25.6 kg/cm / 24.7 kg/cm
Compaction width: 1730 mm