Dynapac CC2300 VI

prix sur demande

DÉTAILS

TECHNICAL DATA+

Masses
Max. operating mass 9400 kg
Operating mass (incl. ROPS) 8050 kg
Operating mass (incl. Cab) 8200 kg
Operating mass (incl. Cab and offset) 8700 kg
Module mass (front/rear) 4150 kg/ 3900 kg
Traction
Speed range 0 – 12 km/h
Vertical oscillation ±6°
Max. theoretical gradeability 41 %
Engine / Drive
Manufacturer/Model Deutz TCD 3.6 HT T4f
Type Water cooled turbo Diesel
Rated power, SAE J1995 55 kW (74 hp ) @ 2200 rpm
Fuel tank capacity 130 l
Alternative Engine
Manufacturer/Model Cummins QSB 3.3 IIIA/T3
Type Water cooled turbo diesel
Rated power, SAE J1995 74kW (99hp) @ 2200 rpm
Alternative Engine
Manufacturer/Model Deutz TCD 3.6 HT StageV
Type Water cooled turbo diesel
Rated power, SAE J1995 55 kW (74 hp ) @ 2200 rpm
Hydraulic system
Driving Axial piston pump with variable displacem. Rad. piston motors(4) with variable displacem.
Vibration Axial piston pumps (2) with variable displacement Axial piston motors (2) with constant dispacement
Steering Gear pump with constant displacem.
Service brake Hydrostatic in forward and reverse lever.
Parking/ Emergency brake Failsafe multidisc brake in both drums.
Compaction CE
Centrifugal force (high/low
A. Wheelbase 3340 mm
B. Width 1680 mm
B2. Width, with cab 1930 mm
C. Curb clearance 580 mm
D. Drum diameter 1150 mm
H1. Height, with ROPS/cab 2990 mm
K. Ground clearance 270 mm
L. Length 4460 mm
O. Off-set 345 mm
R1. Turning radius, outside 6570 mm
R2. Turning radius, inside 5070 mm
R3. Turning radius with off-set, outside 4890 mm
R4. Turning radius with off-set, inside 3390 mm
S. Drum shell thickness 18 mm
W. Drum width 1500 mm
α. Steering angle ±32°
Operating Mass: 8050 kg
SLL (front/rear): 27.7/ 26.0 kg/cm
Compaction width: 1500 mm
amplitude)
75 kN / 53 kN
Vibration frequency (high/low amplitude) 44 Hz / 53 Hz
A. Wheelbase 3340 mm
B. Width 1680 mm
B2. Width, with cab 1930 mm
C. Curb clearance 580 mm
D. Drum diameter 1150 mm
H1. Height, with ROPS/cab 2990 mm
K. Ground clearance 270 mm
L. Length 4460 mm
O. Off-set 345 mm
R1. Turning radius, outside 6570 mm
R2. Turning radius, inside 5070 mm
R3. Turning radius with off-set, outside 4890 mm
R4. Turning radius with off-set, inside 3390 mm
S. Drum shell thickness 18 mm
W. Drum width 1500 mm
α. Steering angle ±32°
Operating Mass: 8050 kg
SLL (front/rear): 27.7/ 26.0 kg/cm
Compaction width: 1500 mm