Dynapac CC1000 e

prix sur demande

The Dynapac CC900 e is an electric driven roller that is a member of the small asphalt roller family. It can do a full day work without the need of recharging the batteries when used in its normal applications like small-scale compaction pattern work such as pavements, cycle paths, small roads and small parking areas. The large drum diameter and drive motors connected in series contributes to excellent accessibility and hill-climbing capacity. Propulsion and vibration naturally come as standard on both drums


Max. operating mass 1840 kg
Operating mass (incl. ROPS) 1775 kg
Speed range (Dual/TC/AS) 0 – 9 km/h
Vertical oscillation ±13°
Max. theoretical gradeability %
Alternative Engine
Hydraulic system
Driving Axial piston pump with variable displacement and servo. 2 radial piston motors with constant displacement.
Vibration Gear pump/motors with constant displacement.
Steering Gear pump with constant displacem.
Service brake Hydrostatic in forward and reverse lever.
Parking/ Emergency brake Failsafe brake in both drums.
Compaction – Oscillation
Oscillation frequency Hz
Electric motor drive and steering, type Permanent magnet
Electric motor drive and steering, power 11 kW
Electric motor drive and steering, max rpm 2700 rpm
Electric vibration motor, type Permanent magnet
Electric vibration system, power 9,4 kW
Electric vibration motor, max rpm 2550 rpm
Battery type Lithium-ion
Battery voltage 48 V
Battery capacity 14,8 kWh
Charging time 20% -80% 1 phase 230 volt: 6 h
Charging time 20% -80% 3 phase 400 volt: 1,3 h
A. Wheelbase 1350 mm
B. Width 1070 mm
C. Curb clearance 465 mm
D. Drum diameter 584 mm
H1. Height, with ROPS/cab 2300 mm
K. Ground clearance 255 mm
L1. Length 2040 mm
L2. Length (ROPS) 2095 mm
O1. Overhang, right 35 mm
O2. Overhang, left 35 mm
R1. Turning radius, outside 2860 mm
S. Drum shell thickness 13 mm
W. Drum width 1000 mm
α. Steering angle ±34°
Operating Mass: 1775 kg
SLL (front/rear): 8.7/ 9.1 kg/cm
Compaction width: 1000 mm